150L Kwikot Solar Geyser Flat Plate Collector

R20,800.00

The indirect 150L Kwikot solar geyser with flat plat collector is used in locations where frost occurs, where the ambient temperature falls below 5°C, and where the water quality is poor (more than 600ppm Total Dissolved Solids / Minerals). The system can be used with one or two Solar Collector Panels dependent on the capacity of the solar tank.

  • 400KPA
  • Frost Locations
  • Indirect System
  • Flat Plat Collector
  • High-Pressure System

 

For More Information Contact Us

Out of stock

Description

The 150L Kwikot Solar Geyser with Flat Plate Collector is an indirect system where the potable water used in the household (hot water) does not circulate through the solar collector panels, but remains in the solar water heater and is heated through a heat exchanger around the vessel. Propylene glycol is circulated through the solar collector panels, transferring solar energy into the heat exchanger and in turn, heating the water in the solar water heater.

The 150L Kwikot Solar Geyser with Flat Plate Collector is an Indirect System and complies with SANS 1307, is SABS 400kPa approved and can be used as a close-coupled system or split system. The inner cylinder is manufactured from 2mm steel and thermo fused porcelain enameled for cylinder longevity and hygiene.

Polyurethane insulation between the heat exchanger and outer casement reduces energy and heat loss. 2 x aluminium sacrificial anodes are fitted for corrosion protection.

The 150L Kwikot Solar Geyser with Flat Plate Collector is designed for domestic hot water application in conjunction with one or more solar collector panels or solar vacuum tubes. The Solar Water Heater is fitted with an Isolator Switch (IPX4 rated).

The two extra fluid connections required for connecting solar collector panels or solar vacuum tubes, and the booster element
ensures that the solar water heater can be used as a conventional electric water heater and as a solar water heater.

The 150L Kwikot Solar Geyser with Flat Plate Collector thermostat will automatically switch on when the incoming hot propylene glycol fluid from the solar collector panels has not reached the set temperature setting on the thermostat. This will occur on cloudy days and at night when the water temperature drops in the solar water heater or when hot water is drawn off and cold water enters the solar water heater.

 
Solar Geysers | Kwikot Kwiksol



 

Langebaan – Vredenburg – Saldanha – Hopefield – St Helena Bay – Velddrif – Jacobs Bay – Moorreesburg – Yzerfontein – Cape Town